Posts

Flight to Death Valley

Image
We took the T210 down to Furnace Creek, Death Valley national park. Here's some snapshots in no particular order (LOL): And a video of the landing:

OpenSCAD Module for Rounded Boxes

Image
I got kind of tired of rewriting the same OpenSCAD code to build rounded boxes for things and messing up the minkowski sum math in the process, so I built a simple module to do it for me.  Usage is simple: include <rounded_case.scad> rounded_case(25, 25, 10, 2); The paramaters are: rounded_case(X, Y, Z, T, LID , LID_OFFSET ) Where: X, Y, Z : Inside dimensions of box T : Thickness of walls LID : optional, bool : true to also make a lid LID_OFFSET : optional :  how much smaller to make the "lip" of the lid that fits inside the top of the box The outside dimensions of the box will be the inside dimensions + 2 x T.   E.g. if the X dimension is 20mm, and T is 2mm, then the width of the box will be 24mm (20 + 2 + 2).   The example above will make a box that is 29mm x 29mm x 14mm (with the lid on) on the outside, and 25 x 25 x 10 on the inside. Get it here:  rounded_case.scad

"Full Boat" - flew to Lompoc, CA to watch the Falcon 9 launch

Image
I flew down to Lompoc, CA on Sunday with Miles, and our friends the Baalmans (Gary, Laura, & their two kids) to watch the SpaceX Falcon 9 launch at Vandenberg AFB. This was the first Falcon 9 "return to land" on the west coast, and it went spectacularly. We found a great viewing spot along HWY 1 overlooking the launchpad.

Snapshots from N6779B

Image
A few snapshots from my first couple of months of T210 ownership:

I bought a new aircraft!

Image
I decided, at long last, it was time to upgrade to something capable of more speed, altitude, and carrying my family.   N6779B is a 1978 Cessna T210M.  It's turbocharged and capable of climbing into the flight levels, so it's much more suitable for getting in and out of the Sierras.  ;) Adventures to come!

Live Stream of the "Super-Blue-Blood Moon" Lunar Eclipse

Sonoff S31 Disassemble and Flash Instructions

Image
I recently bought some Sonoff S31 "smart outlet" switches, as I like the form factor better than the Sonoff Basic and the larger Sonoff S20.  I was able to disassemble and flash them with the fantastic Sonoff-Tasmota firmware from Theo Arends . Disassembly instructions: 1. The darker colored square panel with the button on it snaps off.  Pry it carefully off from one side to remove it: 2. There's two "slide-out" corner pieces on the male plug side. Slide these towards the button side: 3. Remove the three screws that are now exposed: 4. The case containing the female outlet side should separate easily now.  No prying necessary: 5. The circuit board is actually two boards soldered together in an "L" shape.  The small edge with the button on it contains the serial header for the ESP8266.  From the top down, the connections are VCC, RX, TX, N/C, N/C, GND   (Notice the two unused pads labeled TX & RX.  They don'...